-Universal Testing Machine, Impact Testing Machine-

Blog

» Blog

200 kn utm machine

April 15, 2021

200 kn utm machine

Best Servo Actuator 200KN Universal Tensile Testing Machine

 

Product Description

 

Equipment Summary:

Best Servo Actuator 200KN Universal Tensile Testing Machine is a new material testing machine that combined with the electronic technology andmechanical transmission.it has accurate load speed, range of force measurement, Has high accuracyand sensitivity for the load,displacement measurement and control, it also can be tested the constant-velocity loading, constant- velocity displacement. This machine is simple to operate, especially suitablefor controlling quality in production line, This series of machine is mainly applied to test the non-metallicand metallic materials which the load is less than 10ton.

Corresponding Standard:

Best Servo Actuator 200KN Universal Tensile Testing Machine meet GB/T16491-1996 electronic universal testing machine

Technical Parameter:

Model ZME-1009G
Maximum load 50KN, 200 KN (optional)
Accurate 1 grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% (1 grade) / from 0.4% to 100% (0.5 grade)
Measuring accuracy the value ±1% / the value±0.5%
Tester resolution Max load 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective testing width 400mm (can be customized )
Effective tensile space 400, 500, 600mm (can be customized )
Testing speed From 0.001 to 500mm/min
Accruacy of displacement

measurement

Tolerance: ±0.5% /  tolerance:±0.2%
Deformation of measured

system according to the requirements

Min span:10mm, Max range of deformation 800mm

Extended deformation span : 25mm, 50mm, 100mm,

range of deformation 5mm, 10mm, 25mm

Accuracy of measured

deformation

Tolerance:±0.5% (according to requirement of customer to choose the

larger or small deformation)

safety Electronic-limit protection
Testing platform

moving  device

Fast /slow (two speeds to control) ,can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
Fixture A set of tensile clamp
Machine size 1040*590*2000mm (L*W*H)
Motor Panasonic AC servo motor and drive
Power 220V,50HZ or according to the requirement
Power 0.75KW (depending on different motor)
Weight 500 Kg

 

Main Function:

Best Servo Actuator 200KN Universal Tensile Testing Machine mainly applied to test the metallic and non-metallic materials in tension, compression,bending, shear, peel,tear or two-points extensions and others., such as rubber, plastic, wire and cable,optical fiber and cable, safe belt, leather belt composite materials, plastic profiles, waterproof membrane, steel, copper,profiles, spring steel, bearing steel,stainless steel (as well as other high-hardness steel), castings, plate, strip, non-ferrous metal wire .

Main Feature:

Best Servo Actuator 200KN Universal Tensile Testing Machine adopted photoelectric encoder  to measure

 the displacement, the controller uses the embedded single-chip microcomputer  structure with multi-function software, which combined with measurement, control, culculation and storage.It can automatic calculate the stress, rate of elongation(need to add with extensometers),  tensile strength,elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rateof elongation; Using computer to display the dynamic curves in the testing process and  process the data, After testing, it canre-analysis and editing the data by amplifying the curves through the graphicsprocessing module, printing reports, product performance reached the international advanced level.

Maybe you like also