tester indeks aliran lelehan cina
ASTM D1238 Extrusion Plastometer Plastic PVC Melt Flow Rate Index Testing Machine
Equipment Overview:
Melt Flow Index MFI Testing Machine digunakan untuk menentukan laju aliran lelehan termoplastik (MFR; unit: g / 10 menit) instrumen. Untuk polietilen, polypropylene, polioksimetilena, resin ABS, poli-karbonat, nilon, plastik dan polimer lainnya laju aliran lelehan fluorida pada penentuan suhu tinggi.
By Industry:
For factories and enterprises and research institutes in the production and research.
Memenuhi kriteria:
The machine design and manufacture in accordance with the requirements of GB/T3682-2000
Parameter teknik:
Model |
ZL-3013 |
1. Squeeze out some material |
|
Discharge port diameter |
2.095±0.005mm |
Discharge port length |
8.000±0,025mm |
Loaded barrel diameter |
9.550±0.025mm |
Loaded barrel length |
152± 0.1mm |
Diameter kepala piston |
9.475±0,015mm |
Panjang kepala piston |
6.350±0,100mm |
2.Beban uji standar (delapan kelas) |
|
1kelas |
0.325kg =(tongkat + berat + thermal units +1 Tidak. tray body weight) |
2kelas |
1.200 kg =(0.325+2 0.875 eight) |
3kelas |
2.160 kg =(0.325+3 1.835 eight) |
4kelas |
3.800 kg =(0.325+4 3.475 berat) |
5kelas |
5.000 kg =(0.325+5 4.675 berat) |
6kelas |
10.000 kg =(0.325+5 4.675 weight+6 5.000 berat) |
7kelas |
12.500 kg =(0.325+5 4.675 weight+6 5.000+7 2.500 berat) |
8kelas |
21.600 kg =(0.325+2 0.875+3 1.835+4 |
3.475+5 4.675+6 5.000+7 2.500+8 2.915 berat) |
|
Relative error of Load Test≤0.5% |
|
metode pengujian |
Quality Act (MFR) |
kisaran suhu |
Room temperature——450℃ |
Temperature accuracy |
±0.2℃ |
resolusi suhu |
0.1℃ |
Timing range |
0.1——999 seconds |
Timing Accuracy |
0.1 detik |
Metode pemotongan bahan: |
Automatic or manual way of cutting material |
pameran |
LCS |
|
Equipped with a printer, can print test report |
Kondisi kerja |
Ambient temperature10℃—40℃; relative humidity30%—80% |
Ukuran |
250×350×510(L × W × H) |