impact energy testing machine
computer control material testing equipment JB-300W impact energy testing machine
This impact testing machine is used to test the performance of impact resistance. The machine is computer display semi-automatic impact tester, which adopts PC control, electronic pendulum rising, it features high efficiency and accuracy. It can raise pendulum automatically after the impacting for the next test. The computer will display material impact energy absorption, impact resistance, angle and test average, and can print out the results and average.
Main Technical Parameters:
Impact Energy: 250J, 500J
Angle: 150°
The distance between the pendulum shaft and impact point: 750mm
Impact Speed: 5.4m/s
Specimen bearer span: 40mm
Round angle of jaw: R1-1.5mm
Round angle of impact edge: R2-2.5mm
Impact Thickness: 16mm
Accuracy of angle: ±0.1°
Specimen dimension: 10×10×55mm
Machine Dimensions: 2100×650×1960 mm
Weight: 550Kg
Power: Three Phases, 380V, 50HZ
Main Configuration
Main machine
250J, 500J Pendulum: 1 pc. for each
Motor (On the machine)
The set for taking off pendulum (On the machine)
The set for putting on the pendulum (On the machine)
Safe Set (On the machine)
Safety protection set
The adjustment set for support base
The specimen on the in set
Photoelectricity Encoder
Measuring Software
Computer and printer
The set for taking off pendulum: 1 pc.
Foot screws: 4 pcs.
Adjustment Iron: 4 pcs.
Hexagon Spanner: 1 pc.