impact test machines
300J Digital Display Semi-automatic Impact Testing Machine Charpy Impact Tester
Impact testing machine is used to determine the resistance of metal materials to impact under dynamic load, so as to judge the quality of the material under dynamic load.
This machine is a semi-automatic control test machine with simple operation and high efficiency. It can control the pendulum, impact and pendulum electrical appliances, and can use the remaining energy after punching the sample to automatically pendulum to prepare for the next test, especially suitable for continuous operation. Impact test laboratory and metallurgy, machinery manufacturing and other industries that do a lot of impact tests. The B-type impact tester complies with the national standard GB / T3808-2002 “Inspection of Pendulum Impact Tester”, and performs the impact test on metal materials according to the national standard GB / T229-2007 “Charpy Pendulum Impact Test Method for Metal Materials”.
Technical characteristics:
1. The main machine of the testing machine has a single supporting column structure, a cantilever hanging pendulum, and a U-shaped pendulum body.
2. The impact knife is fixed by screws, which is easy to replace;
3. Sample simply supported beam support;
4. The main machine is equipped with safety protection pins and equipped with safety protection nets;
5. The testing machine is semi-automatically controlled. The pendulum, hanging pendulum, impact, and pendulum are all electrically controlled, and the remaining energy after punching the sample can be used to automatically prepare the pendulum for the next test. It is especially suitable for continuous impact. Test laboratory and a large number of metallurgy and machinery manufacturing departments doing impact tests;
6. The testing machine complies with the national standard GB / T3803-2002 “Inspection of Pendulum Impact Tester”, and performs the impact test on metal materials according to the national standard GB / T229-2007 “Metal Charpy Notch Impact Test Method”.
Technical indicators:
1. Impact energy: 300J (sledgehammer) 150 (small hammer)
2. Impact speed: 5.2m / s
3. Pre-lifting angle of pendulum: 150 °
4. Span of sample support: 40mm
5. Round corners of support jaw: R1.0 ~ 1.5mm
6. Fillet of impact blade: R2.0 ~ 2.5mm R8mm
7. The distance from the center of the pendulum to the impact point: 750mm
8. Standard sample size: 10 * 10 (7.5 or 5) * 55mm
9. Pendulum moment: M = 160.7695N.m 80.3848N.m
10. Power supply and power: 3phase 4line 50Hz 380V 180W
11. Dimensions: 2100 * 650 * 1900mm
12. Angle accuracy: 0.1 °
13. Weight: about 500Kg
Clutch Torque force | 630N.m | 1000N.m | ||
Impact energy | 300J | 150J | 500J | 250J |
Value of every grid | 2J | 1J | 5J | 2.5J |
Pendulum Moment | 160.7695N.m | 80.3848N.m | 267.9492N.m | 133.9746N.m |
Impact Speed | 5.2m/s | 5.4m/s | ||
Distance between pendulum center and sample center | 750mm | 800mm | ||
Pendulum Preparing angle | 150° | |||
Sample seat span | 40mm | |||
jaw fillet of specimen seat | R (1.0 ~ 1.5) mm (1mm is special order) | |||
the blade curvature radius | R (2.0 ~ 2.5) mm (8mm is special order) | |||
sample size | 10 *10 (7.5 or 5) * 55 mm | |||
Power supply | 380V 50Hz 250W/380W |
Equipment main configuration:
1. 300 Joule host;
2. Each of 150J and 300J pendulums;
3. Motor (mounted on the host); 1
4. Hexagon wrench S = 12 (screw socket seat platen screw) 1 piece;
5. One support adjuster;
6. One sample centerer;
7. Disassembler (for swing) 1 piece;
8. 4 ground screws;
9. Adjust the oblique iron 4 pieces;
10. Protective net 1 set;