test di impatto charpy per materie plastiche
Applicazione:
This series of digital impact testing machine is mainly used for the
determination of impact toughness of non-metallic materials such as rigid plastics, nylon rinforzato, FRP, ceramica, pietra fusa, La macchina di prova della temperatura di rammollimento HDT Vicat viene utilizzata principalmente per la determinazione della temperatura di distorsione del calore e della temperatura del punto di rammollimento Vicat di materiali non metallici come la plastica, eccetera. È l'attrezzatura di prova ideale per l'industria chimica, istituti di ricerca, università, ispezione di qualità, eccetera.
Caratteristiche:
1. This series of impact testing machine is an intelligent digital display impact testing machine developed by micro-computer technology. It can automatically correct the energy loss caused by friction and wind resistance, and get rid of the numerical chart of energy correction due to the influence of resistance. (The detection of the residual energy of the pendulum and the correction of the energy loss after the sample breaks are completed once in the impact process).
2. This series of impact testing machines adopts electronic display test results to make the readings more intuitive and improve the accuracy and accuracy of the impact machine.
3.Using rotary encoder garden grating angle measurement technology, with advantage of high precision, good stability and large measurement range, digital displaying
the thrust energy, impact strength, pre-elevation angle, elevation angle, average value, and energy loss automatic correction.
4. The swing arm is made of new carbon fiber material, the strength is higher than steel, and the weight is lighter than aluminum.
Standards:
The main technical parameters are in full compliance with the requirements of IS0 179-2000, GB / T 1043-2008, JB/T 8762-1998, GB / T 1451-2005, GB/T18743-2002
specificazione:
Modello |
HT-1043-5D |
HT-1043-25D |
HT-1043-50D |
Pendulum energy |
1J,2J,4J,5J |
7.5J,15J,25J |
25J,50J |
Angolo di prova |
150° |
||
velocità di impatto |
2.9Signorina |
3.8 Signorina |
3.8 Signorina |
Pendulum center distance |
221mm |
380mm |
380mm |
Angolo della lama di impatto |
30° |
||
Impact blade fillet radius |
R=2mm ±0.5mm |
||
Spaziatura del supporto della mascella |
40mm,60mm,70mm,95mm |
||
Support blade corner radius |
R = 1 millimetro |