The testing machine will do the opened loop testing control when used the convenient manual valve. nel frattempo, it will drive the precision clearance seal hydraulic cylinder so as to complete the test of the tensile, compressione, bending and other testing performance. L'operazione è diretta, veloce, efficient, in line with national standards.
The force value was tested by the sensor, and realize the setting for the parameter, acquisizione dei dati, in lavorazione, analisi, Conservazione, as well as the display for the force value, velocità di caricamento & max load through the LED displayer. Inoltre, it can automatically calculate the tensile strength, yield characteristics of the yield strength of the material, calculate break elongation test data, etc. This kind of equipment also has such functions of limit protection, protezione da sovracorrente, protezione contro il sovraccarico, eccetera.
Carico massimo | 300KN |
Errore di test | ≤1% |
Gamma di prova | Carico massimo 2% ~ 100% |
Metodo di serraggio | Hydraulic Clamping |
Diameter for Round | Φ4~Φ32 mm |
Thickness for Flat | 0~ 15 millimetri |
Width for Flat | 70 mm |
Max trazione Spazio | 550 mm |
Max compressione dello spazio | 500 mm |
Control Cabinet Size | 1100(L)×620(W)×850(H) mm |
Dimensione host | 730(L)×590(W)×1900(H) mm |
Energia | 2.3kW |
Host peso | 2500 kg |
The clear spacing of columns | 450 mm |
Compression Plate Size | Φ150 mm |
Span for Roller | 30-400 mm |
Larghezza del rullo | 140 mm |
Allowable Bending Length | 100 mm |
Max Piston Stroke | 200 mm |
Max Piston Speed | about 60 mm/min |
Spazio di prova Regola velocità | about 100 mm/min |