Breves
FZG calces lapsum test test apparatus ad apparatus est a multi-. Ad exsequendam principium ex parte volentis non potest esse facultatem ad ducatus, Item non est specialis necessitatibus a client. Apparatus ad flexuram Apparatus lassitudine vires lassitudine contingere solet viribus utens amet.
II. Adhibere:
Et hoc confirmat apparatus ad GB / T 13672-92 vexillum test scuffing ponderi ferendo apto ad modum et a SH anni / T 0366-1992 ducatus modum gerendi facultatem test (C CL modum apparatus Apparatus)
III. technica specificationem:
G1-species Mr.
max. Aureus 1Kn. m
max. genus loading 13 classes
II ℃ ± temperatus imperium accuracy
Motricium potestatem 6.5 / 8kw
celeritate motricium 1450/2880 r / min
Calces buxum volumine 1.25L
Calefactivam 0.5X3 1.5 KW =
dimensiones 1390X750X1082mm
GB / T 13672-92
Standard test method for scuffing load capacity of gears
SH/T 0306-1992
Lubricant carrying capacity test method (C CL modum apparatus Apparatus)
DIN ISO 14635-1-2006
Gears-FZG test procedures-Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
GB / T 14229-93
Standard of test method for surface load capacity of gears
GB / T 14230-93
Standard of test method for bending load capacity of gears
1> The fluctuation range of the power supply voltage should not exceed the rated value ± 10% and the fluctuation range of the frequency should not exceed 2% of the rated value.
2>Test machine should be installed horizontally and the installed base should be smoothly. The horizontal error for the host workbench aspect direction should not exceed 0.2/1000.
3>Room temperature 10 º C-35 º C.
4>The environment no vibration, no strong magnetic interference and non-corrosive media.
5>Relative humidity less than 80%.
1> modus loading
This machine is a dynamic closed-loop configuration, and load mode adopts rod hanging weights mode.
The loading lever is hung on the load sheave clutch. By hanging weights plus through fastening loaded clutch nut and make the two sheave tighten which installed on the loaded clutch. Then remove the weights and the loading lever and you can readout the torque on the clutch torque measurement.
3> Installation and adjustment
Make the test machine at the level of the floor and mat three horns. Put the spirit level on the test table. By adjusting the horn to make the vertical and horizontal direction error do not exceed 0.2/1000.
The test machine host should be placed separately from the control cabinet to avoid the noise and pungent odor when the testing machine working. After the start of the test machine, person can not inter into the room which the machine placed.
The test procedure in accordance with the the "lubricant carrying capacity assay (CL-100 gear machine method) SH/T0306-92" provisions.
