melt flow index price
MFI MFR MVR Test Extrusion Plastometer Plastic Melt Flow Rate Melt Flow Index Tester
Overview
QL-450 series melt flow rate meter is mainly used for the analysis and research of melt flow rate of thermoplastics under certain conditions. The melt flow rate (melt index) of the thermoplastic refers to the mass of the plastic passing through the standard die every 10 minutes under a certain temperature and load. It is expressed by the MFR (MI) value, which can distinguish the thermoplastic in the molten state of viscous flow characteristics. The test is great significance to the quality assurance of raw materials and products of thermoplastics and chemical fiber.
Standards
ISO 1133-2011 : Polymer materials-Mass and volume flow rate detection
ASTM D1238-13 : Standard Test Method for Melt Flow Rate of Thermoplastics
GB/T 3682-2018 : Thermoplastic melt mass flow rate and melt volume flow rate determination
JJG878-1994 (2005) : Verification Regulations for Melt Flow Rate Meter
JB/T5456-2005 : Technical conditions of melt flow rate meter
Product Parameter
Measurement Method
|
Mass method/Volume method
|
Display Mode
|
4.3 inch LCD color touch screen
|
Timing Accuracy
|
0.01S
|
Cutting Method
|
Manual, Automatic
|
Measuring Range
|
(0.1-2000) g/10min
|
Recovery Time
|
≤ 2min
|
Result Output
|
Micro printer
|
Power
|
220V, 50HZ
|
Extrusion Part
|
|
Discharge Port Diameter
|
φ2.095±0.005mm
|
Discharge Port Length
|
8.000±0.025mm
|
Charging Barrel Diameter
|
φ9.550±0.007mm
|
Charging Barrel Length
|
152mm
|
Piston Head Diameter
|
φ9.474±0.007mm
|
Piston Head Length
|
6.350±0.100mm
|
Piston Displacement Indication Error
|
±0.01mm
|
Barrel Temperature
|
|
Barrel Temperature Range
|
Temperature control point can be arbitrarily set within the range of 50.0℃ ~ 450.0℃
|
Intelligent PID Regulation
|
Reach the temperature control point and constant temperature in a short time
|
Constant Temperature Accuracy
|
±0.2℃
|
Temperature Control Gradient
|
≤±0.5℃ (10mm above the die)
|
Temperature Resolution
|
0.01℃
|
Standard Test Load (Standard test force level 8, test load relative error ≤0.5%, using mirror chrome plating Standard)
|
|
1 Grade
|
0.325kg= (piston rod + weight tray + heat insulation sleeve + weight body No. 1)
|
2 Grade
|
1.200 kg=(0.325+2 0.875 weight)
|
3 Grade
|
2.160kg =(0.325+ No.3 1.835 weight)
|
4 Grade
|
3.800 kg=(0.325+ No.4 3.475 weight)
|
5 Grade
|
5.000 kg=(0.325+ No.5 4.675 weight)
|
6 Grade
|
10.000 kg=(0.325+ 4.675 weight No. 5+ 5.000 weight No.6)
|
7 Grade
|
12.500 kg=(0.325+ 4.675 weight No.5 + 5.000 weight No.6 + 2.500 weight No. 7)
|
8 Grade
|
21.600 kg=(0.325+ No. 2 0.875+ No.3 1.835+ No.4 3.475+ No.5 4.675+ No.6 5.000+ No. 7 2.500+ No.8 2.915 weight)
|