melt flow index measurement
The main function:
Quality method melt flow rate test function.
Automatic cutting function.
Mass method melt index calculation function.
Melt index test result storage function.
Save the results to view, print, delete functions
Technical Parameters:
Extrusion part
Diameter of the discharge port: Φ2.095±0.005mm
Length of discharge port: 8.000±0.025mm
The inner diameter of the charging barrel: Φ9.550±0.025mm
Length of charging barrel: 152±0.1mm
Piston rod head diameter: Φ9.475±0.015mm
Piston rod head length: 6.350±0.100mm
Effective stroke of the piston rod: 30 mm
Test load
The test load is obtained by combining different numbers of weights, which can form the nominal load required for the test, and there are 8 levels in total:
Level 1: 0.325kg=(piston rod+weight tray+heat insulation sleeve+1#weight body)=3.187N
Level 2: 1.200kg (0.325kg+2#0.875kg weight)=11.77N
Level 3: 2.160kg=(0.325kg+3#1.835kg weight)=21.18N
Level 4: 3.800kg=(0.325kg+4#3.475kg weight)=37.26N
Level 5: 5.000kg=(0.325kg+5#4.675kg weight)=49.03N
Level 6: 10.000kg=(0.325kg+5#4.675k weight+6#5.000kg weight)=98.07N
Level 7: 12.500kg=(0.325kg+5#4.675kg weight+6#5.000kg weight+7#2.500kg weight)=122.58N
Level 8: 21.600 kg=(0.325kg+2#0.875kg weight+3#1.835kg weight+4#3.475kg weight+5#4.675kg weight+6#5.000kg weight+7#2.500kg weight Code+8#2.915kg weight)=211.82N
Temperature range: room temperature~400℃
Temperature control accuracy: ±0.2℃
Temperature fluctuation: ±0.2℃
Temperature resolution: 0.1℃
Temperature recovery time: ≤4min
Test method: quality method (MFR)
Measuring range: O.1~300g/10min(MFR)
Timing accuracy: 0.1S (MFR, MVR)
Cutting method: automatic (during test), manual (during instrument adjustment)
Maximum cutting times: 99 times
Maximum cutting interval time: 9999.9 seconds
Number of results saved: 20 copies
Printer configuration: Panel thermal printer
Power supply: 220V, 50Hz
Power: 490W
Dimensions: length 290 × thickness 410 × height 630 (mm)