New Model 300/500J Low Temperature Automatic Charpy Impact Testing Machine

New Model 300/500J Low Temperature Automatic Charpy Impact Testing Machine

impact testing machine procedure

Product Description

Performance description

This type of testing machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance.

This machine is automatic control impact testing machine. Its rising pendulum, hanging pendulum, sending specimen, positioning and impacting all controlled by pneumatic and electric appliance, which is easy to operate and has high efficiency. After impacting the specimen, the machine can raise pendulum with surplus energy automatically so as to be ready for the next impacting test.

This machine conduct impact test for metallic materials is in line with national standard GB/T3808-2002 “pendulum-type impact test machine inspection”, according to national standard GB/T229-2007 “metallic materials Charpy pendulum impact test method”.

Main technical index

1. Impact energy: 150J, 300J

2. Range of plate-scale and sub-scale value

3. Pendulum moment(impact constant):

4. Angle of rising pendulum in advance: 150º

5. Distance from centre of pendulum and impacting point:750mm

6. Impacting speed: 5.2m/s

7. Span of impact specimens supports: 40mm

8. Arc radius of impact specimens supports ends : National standard: GB/T3808 R1-1.5mm(1mm is special orders)

9. Sample pedestal supporting surface Angle: 0°

10. Round corner of impacting edge: National standard: GB/T3808 R2-2.5mm (8mm is special orders)

11. Impact knife angle:30°

12. Thickness of impact knife:16mm

13. Size of specimen: 10*10*55mm (sample length≤55mm)

14. Speed of sending specimen:≤4S

15. Capacity of specimen case: 10 pieces

16. Motor power: 250W

17. Electric power: three-phase 380V 50Hz

18. Size of host outline (L*W*H): 800mm*500mm*1275mm

19. Net weight of testing machine: about 760kg