New Model 300/500J Low Temperature Automatic Charpy Impact Testing Machine
Ürün Açıklaması
Performans açıklaması
This type of testing machine is used to test metallic materials to resist the impact to determine the nature of the material under dynamic load performance.
This machine is automatic control impact testing machine. Its rising pendulum, asılı sarkaç, örnek gönderme, positioning and impacting all controlled by pneumatic and electric appliance, which is easy to operate and has high efficiency. Numuneyi vurduktan sonra, the machine can raise pendulum with surplus energy automatically so as to be ready for the next impacting test.
This machine conduct impact test for metallic materials is in line with national standard GB/T3808-2002 “pendulum-type impact test machine inspection”, Ulusal standart GB/T229-2007'ye göre "metalik malzemeler Charpy sarkaç darbe testi yöntemi".
Ana teknik indeks
1. Darbe enerjisi: 150J, 300J
2. Range of plate-scale and sub-scale value
Range of energy | 0-300J | 0-150J |
Sub-scale value | 2J | 1J |
3. sarkaç an(darbe sabiti):
Range of energy | 300J | 150J |
Sub-scale value | 160.7695lOuM | 80.3848lOuM |
4. Angle of rising pendulum in advance: 150º
5. Distance from centre of pendulum and impacting point:750aa
6. Impacting speed: 5.2MS
7. Span of impact specimens supports: 40aa
8. Arc radius of impact specimens supports ends : National standard: GB/T3808 R1-1.5mm(1mm is special orders)
9. Sample pedestal supporting surface Angle: 0°
10. Round corner of impacting edge: National standard: GB/T3808 R2-2.5mm (8mm is special orders)
11. Impact knife angle:30°
12. Darbe bıçağının kalınlığı:16aa
13. numunenin boyutu: 10*10*55aa (sample length≤55mm)
14. Speed of sending specimen:≤4S
15. Capacity of specimen case: 10 parçalar
16. Motor gücü: 250W
17. Electric power: three-phase 380V 50Hz
18. Size of host outline (L * W * H): 800mm*500mm*1275mm
19. Net weight of testing machine: about 760kg