machine tests

universal testing machine is suitable for testing mechanical properties of various metal, non-metal and composite materials such as spring, rubber, plastic, textiel, waterdicht materiaal, draad, kabel, draadkabel, draad, draad, metal bar, metalen plaat, hardware, rubber en kunststof, schoeisel, leer, textiel, insulator, terminal and so on

The series universal testing machine is suitable for testing mechanical properties of various metal, non-metal and composite materials such as spring, rubber, plastic, textiel, waterdicht materiaal, draad, kabel, draadkabel, draad, draad, metal bar, metalen plaat, hardware, rubber en kunststof, schoeisel, leer, textiel, insulator, terminal and so on. Such as tensile, scheur, Pel, samendrukking, verbuiging, shearing resistance, three point bending resistance and other physical properties. The machine has the test force digital display, de testsnelheid is traploos instelbaar, the sample is broken automatically, the peak hold and so on. The test results fully meet the requirements of the relevant national standards.

Two.Specification Data and Configurations

specificatie van data

configuraties

1. Max. Laden: 200N ;

2. load Range: 2%~ 100% volledige schaal of 0.4%-100% full Scale

3. Nauwkeurigheid load: ± 1%

4. Resolutie van de belasting: 1/300000 van de volledige schaal

5. Measuring Range of Deformation: 2%~ 100%

6. Resolution of Displacement: 0.001mm

7. Accuracy measure of Deformation: ± 1% of ± 0,5%

8. controle Speed(mm / min) :0.01-500(mm / min)

9. Relatieve fout van Speed: ≤ ± 1%

10. Trekproef Space: 600mm

11. Compression Test Space:600mm

12. Load Cell Configuration: een(Max Load), Meer belastingcellen kan worden toegevoegd volgens klantenvereiste.

13. Extend Configuration: Grote vervorming extensometer, hoge of lage temperatuur testkamer, hoge temperatuur oven.

14. Test machine afmeting: 480*280*1480mm

15. Stroomvoorziening: AC110V / 220V / 380V ± 10%, 50Hz-60Hz

16. bescherming functie: de testmachine heeft de functie van overbelasting en grensbescherming

17. Gewicht: 150kg

1. Hoge sterkte hoofdunit:1 reeks

2. Hoge precisie optische encoder:1 reeks

3. Hoge precisie arc synchroon toerentalverlagingssysteem:1 pak

4. Hoge precisie kogelomloopspindel:1 pak

5. Taiwan TECO AC Servo motor and Controle systeem(Panasonic Motor Optioneel):1 pak

6. High Precision Load Sensor:1 pc

7. treksterkte armatuur:1 pak

8. compressie armatuur:1 pak

9. buigen armatuur(facultatief):1 pak

10. Kleine vervorming extensometer(facultatief):1 pak

Specificatie: facultatief

11. HX-test software:1 pak

12. Lenovo computer:1 reeks

13. HP printers:1 reeks

Drie. Functies en kenmerken

The design of HDW series microcomputer controlled universal testing machine converge the control technology and shape design of advanced test equipment. This machine has beautiful appearance, gemakkelijke bediening, geen vervuiling, laag geluidsniveau, stabiele en betrouwbare prestaties, and has a wide range of speed regulation.The machine uses AC servo motor and Control system as the driving device. After the circular arc synchronous belt and the circular arc synchronous pulley deceleration system decelerate, the precision ball screw pair is loaded, and a variety of mechanical properties test of the sample is completed.

1. The precision screw pair driving by high precision, all digital speed control system and the precision deceleration system carry out the experiment to achieve a wide range adjustment of the test speed. The noise of the test process is low and the operation is stable.

2. It can be used for the cross pin structure and the universal joint. On the one hand, it ensures the concentricity of the test. On the other hand, the influence of the irregular sample on the sensor is eliminated.

3. Windows operating system, humanized operation interface, can display test method selection interface, testparameter selectie-interface, testbedrijf en resultatendisplay interface en kromme vertoningsinterface, and can display each parameter curve in real time, easy to test data analysis, process monitoring.

4. De balk kan worden aangepast op een snelle en langzame manier wanneer het monster wordt vastgeklemd. Het heeft de beschermingsmiddelen zoals overstroom, overdruk en overbelasting.

5. Configure the printer, which can directly realize the control of the test process and the storage and printing of data.

Misschien heb je ook graag