-Üniversal Test Makinesi, Darbe Test Cihazı-

Blog

» Blog

eriyik akış hızı indeksi test cihazı

Nisan 23, 2022
temel eriyik akış indeksi dynisco eriyik akış indeksi test cihazı eriyik akış indeksi astm d 1238 erime akış indeksi d1238 eriyik akış indeksi cihazı akım indeksi makinesi eritmek eriyik akış indeksi ölçümü eriyik akış indeksi polimerleri eriyik akış endeksi fiyatı Erime Akış İndeksi Test Cihazı akım indeksi test eritmek 1221 eriyik akış indeksi test cihazı çin satılık eriyik akış indeksi test cihazı eriyik akış indeksi test cihazı instron eriyik akış indeksi test cihazı uluslararası ekipman eriyik akış indeksi test cihazı eriyik akış indeksi test cihazı kılavuzu erime akış indeksi test üreticisi hindistan eriyik akış indeksi test cihazı üreticisi eriyik akış indeksi test cihazı plastikleri erime akış indeksi tester fiyat eriyik akış indeksi test cihazı güney afrika eriyik akış hızı indeksi test cihazı eriyik akış hızı test cihazı eriyik akış test cihazı erime indeksi test cihazı Plastik Erime Akış İndeksi Test Cihazı satılık plastik eriyik akış indeksi tester presto eriyik akış indeksi test cihazı eriyik akış indeksi test cihazı fiyatı zwick erime akış indeksi test cihazı

Plastic lab melt flow rate index meter tester

Melt flow rate instrument is also called plastic, Reçine eriyik indeksi aleti, viskoz akış durumu MFR değeri olduğunda eriyik akış hızını ölçmek için kullanılır., polikarbonat için geçerlidir, aromatik sülfonun daha yüksek sıcaklığı, flor plastik, naylon ve diğer mühendislik plastikleri, can also be applied to polyethylene (PE), polisitren (PS), polipropilen (PP), ABS reçine, polyformaldehyde (POM), polikarbonat (PC) resin with lower melting temperature, plastik testi gibi, widely used in plastic production, plastik ürünler, such as petroleum and chemical industry and related colleges and universities, bilimsel araştırma birimleri, and the commodity inspection department

tip:
1. The digital display
Set the electronic P.I.D regulator for temperature control, which is completely in line with national standards (cannot test melt volume flow rate and melt density).The machine also sets up the counter, which is convenient for measuring cutting time.The instrument works with the cutting and weighing method, and the scope is wide.
2. LCD is fully automatic.
Single chip microcomputer temperature control and program control, under test ended, and automatically display the time needed for a specific volume of the melt flows through the mouth mould, the calculation flow rate value, can repeat of high precision, easy to operate.The system is involved in temperature control.The manual cutting device can ensure the smooth detection by cutting and weighing method when automatic detection is not possible.Compact structure, beautiful shape, yüksek hassasiyet, easy to use accessories.
3. Microcomputer controlled automatic.
The melt indexer sets up a single chip microcomputer automatic test device and electronic automatic cutting device.After the microcomputer system has input the corresponding parameters from the light touch key, the test is finished, namely, automatic calculation and printing of flow rate value, high repeatability and convenient operation.The temperature control of the use of computer software technology, which can automatically eliminate because of the power supply voltage fluctuation and the influence caused by environmental changes, and when the temperature of the instrument and the standard temperature thermometer (special correction to match) appeared deviation, the operator can easily random fixed.The electronic automatic cutting device can be automatically cut at the preselected interval to calculate the final result when automatic detection is not possible.

Ana uygulama:

Melt flow rate instrument, used to measure the thermoplastic resin melt mass flow rate (MFR), erime akış hızı (MVR) eriyiğin hacmi ve yoğunluğu, yalnızca polikarbonatın yüksek erime sıcaklığına uygulanamaz, naylon, flor plastik, aromatik sülfonlar mühendislik plastikleri, polietilen için de geçerlidir, polisitren, polipropilen, ABS reçine, Daha düşük erime sıcaklığına sahip poli formaldehit reçinesi, plastik testi gibi, plastik hammaddelerde yaygın olarak kullanılır, ürünler, petrol ve kimya endüstrileri, ve ilgili kolejler ve üniversiteler, bilimsel araştırma birimleri ve emtia denetim departmanı.

Barrel parameters	Inner hole 9.55±0.025mm
Pistons parameters	Piston head: 9.475±0.015mm
Piston length	H=6.35±0.1mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parametreleri otomatik olarak ayarlanabilir, ±'ya kadar hassasiyet 0.1 degree centigrade
Sıcaklık aralığı	80degree centigrade~400degree centigrade
Sıcaklık doğruluğu	±0.2 degree centigrade
Ekran çözünürlüğü	0.1degree centigrade
Maximum comsuption	< 600W
Sıcaklık doğruluğu	4 beni.
Weight parameters are as follows:
Weight accuracy	0.5 ±%
Temel yapılandırma	0.325kilogram ,1.2kilogram,2.16kilogram,3.8kilogram,5kilogram,10kilogram,12.5kilogram,21.6kilogram
		Position detection
		Control precision	± 0.1mm
Loop distance from up and down	30aa
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 beni.
Material be installed	1 beni.
Material sample temperature recovery time	4 beni.
When binder set	1beni

How it works:
Melt flow rate meter is in the specified temperature conditions, with high-temperature furnace to melt the state of the measured object. The molten state of the measured object, the required weight load by gravity out of a certain diameter hole in the test. Plastics in industrial enterprises and scientific research units of production, often with “melt (mass) flow rate” to represent the polymer material in the molten state of fluidity, viscosity and other physical properties. Melt flow rate refers to the extrudate, the average quality of the sample paragraphs are translated into 10 minutes of extrusion volume. Melt (mass) flow rate expressed by MFR, birim: g / 10 dakika (g / beni)
Formula: MFR (θ, mnom) = tref × m / t = 600 × m / t (gr / 10 dak)
Where: θ – test sıcaklığı
mnom – Nominal Load Kg
m – the average quality of cut g
tref – reference time (10beni): 600
t – cut off time interval unit: saniye.

Example:
A set of plastic samples, a cut every 30 saniye, the quality of the results section: 0.081 g, 0.086 g, 0.081 grams, 0.089 grams, 0.082 grams.
Cut the average quality m = (0.081 +0.086 +0.081 +0.089 +0.082) ÷ 5 = 0.0838 ≈ 0.084 (g)
Into the formula: MFR = 600 x 0.084/30 = 1.680 (g / 10 beni)

By Industry:
For factories and enterprises and research institutes in the production and research.
Kriterleri karşılamak:
The machine design and manufacture in accordance with the requirements of GB/T3682-2000

teknik parametreler:
model
Plastic Melt Flow Rate Tester, MFI Testing Machine
1. Squeeze out some material
Discharge port diameter Φ2.095±0.005mm
Discharge port length 8.000±0.025mm
Loaded barrel diameter Φ9.550±0.025mm
Loaded barrel length 152±0.1mm
Piston head diameter 9.475±0.015mm
Piston head length 6.350±0.100mm
2.Standard test load (sekiz sınıf)
1grade 0.325kg=(çubuk + ağırlık + thermal units +1 Yok hayır. tray body weight)
2sınıf 1.200 kg=(0.325+2 0.875 eight)
3sınıf 2.160 kg=(0.325+3 1.835 eight)
4sınıf 3.800 kg=(0.325+4 3.475 ağırlık)
5sınıf 5.000 kg=(0.325+5 4.675 ağırlık)
6sınıf 10.000 kg=(0.325+5 4.675 weight+6 5.000 ağırlık)
7sınıf 12.500 kg=(0.325+5 4.675 weight+6 5.000+7 2.500 ağırlık)
8sınıf 21.600 kg=(0.325+2 0.875+3 1.835+4