aplikace
Melt Flow Index tester is suitable for PC, nylon, fluoroplastics and other engineering plastics which of higher melt temperature, and also suitable for PE, PP, ABS resin and other plastics which of lower melt temperature.Standard
ASTM D1238 | ISO1133 | GB3682-2000 |
JB/T 5456 |
Funkce
1. Melt Flow Index testerhas two test methods: MFR and MVR, and also can test melt density
2. Chinese/English operate interface
3. Simple structure, snadná obsluha, snadno se udržujeSpecifikace
Modelka | toku taveniny indexer xnr-400 |
teplotní rozsah | 100℃~450℃ |
Temperature error | <0.5℃ |
rozlišení teploty | 0.1℃ |
Heating time | <30mě |
Temperature recovery time | <4 mě |
Zdvihový přesnost | 0.1mm |
Time accuracy | 0.01s |
Flow rate measuring range | 0.1 ~ 100g/10min; 0.04~30g/10min, we suggest MFR; >30g / 10 min, we suggest MVR |
Standard die | Tungsten carbide, Φ2,095±0,005mm |
Height of standard die | 8.000±0.020mm |
Inner diameter of feed cylinder | Φ9,550±0,025 mm |
Diameter of piston | Φ9.475±0.015mm |
Length of piston head | 6.350±0,100 mm |
Napájení | AC220V, 50Hz, 450w |