-Universal testarea mașinilor, Impact testarea mașinilor-

Blog

» Blog

indexator de curgere de topire xnr-400

noiembrie 16, 2020

cerere

Melt Flow Index tester is suitable for PC, nailon, fluoroplastics and other engineering plastics which of higher melt temperature, and also suitable for PE, PP, ABS resin and other plastics which of lower melt temperature.Standard

ASTM D1238ISO1133GB3682-2000
JB/T 5456  

Caracteristici

1. Melt Flow Index testerhas two test methods: MFR and MVR, and also can test melt density

2. Chinese/English operate interface

3. Simple structure, ușor de operat, usor de intretinutSpecificație

Modelindexer curgere a topiturii xnr-400
Interval de temperatură100℃~450℃
Temperature error<0.5℃
rezoluţie temperatură0.1℃
Heating time<30mă
Temperature recovery time<4 mă
precizia de deplasare0.1mm
Time accuracy0.01s
Flow rate measuring range0.1   ~ 100g/10min; 0.04~30g/10min, we suggest MFR; >30g / 10min, we suggest MVR
Standard dieCarbură de tungsten, Φ2,095±0,005mm
Height of standard die8.000±0.020mm
Inner diameter of feed cylinderΦ9.550±0.025mm
Diameter of pistonΦ9.475±0.015mm
Length of piston head6.350±0.100mm
PutereAC220V, 50Hz, 450w

Poate iti place, de asemenea,