Aplikasi
Melt Flow Index tester is suitable for PC, nilon, fluoroplastik dan plastik rekayasa lainnya yang memiliki suhu leleh lebih tinggi, dan juga cocok untuk PE, PP, ABS resin and other plastics which of lower melt temperature.Standar
ASTM D1238 | ISO1133 | GB3682-2000 |
JB/T 5456 |
fitur
1. Melt Flow Index testerhas two test methods: MFR dan MVR, and also can test melt density
2. Chinese/English operate interface
3. Simple structure, mudah dioperasikan, mudah untuk mempertahankanSpesifikasi
Model | pengindeks aliran lelehan xnr-400 |
kisaran suhu | 100℃~450℃ |
Temperature error | <0.5℃ |
resolusi suhu | 0.1℃ |
Heating time | <30saya |
Waktu pemulihan suhu | <4 saya |
akurasi perpindahan | 0.1mm |
Time accuracy | 0.01s |
Flow rate measuring range | 0.1 ~ 100g/10min; 0.04~30g/10min, we suggest MFR; >30g / 10 menit, we suggest MVR |
Standard die | Tungsten carbide, 2.095±0.005mm |
Height of standard die | 8.000±0.020mm |
Inner diameter of feed cylinder | 9.550±0.025mm |
Diameter of piston | 9.475±0.015mm |
Length of piston head | 6.350±0,100mm |
Kekuasaan | AC220V, 50hz, 450w |