universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, uses hydraulic loading, computer display test results, easy operation, accurate and reliable test readings, can do the general steel and other metal materials tensile, compression, bending and shear test, can also be used as general materials , plastics, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, displacement and deformation.
Max test force | 1000KN |
Test force measurement range | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
Test force resolution | 0.01kN |
Displacement measurement resolution | 0.01mm |
Deformation measurement accuracy | 0.01mm |
The maximum tensile test space | 600mm |
The maximum compression space | 550mm |
Piston stroke | 200mm |
Clamping diameter of circular specimen jaw | Φ13-Φ40mm |
Flat specimen jaw clamping thickness | 0-40mm |
Maximum clamp width of flat specimen | 75mm |
Platen size | 160*160mm |
The maximum distance between two points of bending test | 350mm |
Stretch space two pillar distance | 465mm |
Bending roll width | 140mm |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150mm |
Shear specimen diameter | 10mm |
The maximum piston movement speed | 80mm/min |
Voltage | 220V, Three phase |
Pump motor power | 1.1kw |
Beam moving motor power up and down | 0.75kw |
Clamping mode | automatic / manual tightening |
The mainframe dimensions | about 800mm *580 mm*2100mm |
Measuring cabinet dimensions | about 1120mm *700mm *950mm |