universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, utilise la charge hydraulique, résultats des tests d'affichage de l'ordinateur, opération facile, lectures de test précises et fiables, peut faire l'acier général et d'autres matériaux métalliques de traction, compression, essai de flexion et de cisaillement, peut également être utilisé comme matériel général , matières plastiques, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, le déplacement et la déformation.
force d'essai max | 1000KN |
Test de la plage de mesure de force | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
Résolution de la force d'essai | 0.01kN |
résolution de mesure Déplacement | 0.01mm |
Deformation précision de mesure | 0.01mm |
The maximum tensile test space | 600mm |
The maximum compression space | 550mm |
Course | 200mm |
Clamping diameter of circular specimen jaw | F13-F40mm |
l'épaisseur de serrage de la mâchoire d'échantillon plat | 0-40mm |
Maximum clamp width of flat specimen | 75mm |
taille Platen | 160*160mm |
The maximum distance between two points of bending test | 350mm |
Stretch space two pillar distance | 465mm |
Cintrage largeur du rouleau | 140mm |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150mm |
Diamètre de l'éprouvette de cisaillement | 10mm |
The maximum piston movement speed | 80mm / min |
Tension | 220V, Trois phases |
Puissance du moteur de la pompe | 1.1kw |
Beam moving motor power up and down | 0.75kw |
Mode de serrage | automatique / manual tightening |
The mainframe dimensions | A propos de 800mm *580 mm*2100mm |
Mesurer les dimensions de l'armoire | about 1120mm *700mm *950mm |