universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, utilizează încărcarea hidraulică, afișarea computerului rezultatele testelor, operare ușoară, citiri de test precise și fiabile, poate face oțel general și alte materiale metalice la întindere, comprimare, încercarea de îndoire și forfecare, poate fi folosit și ca materiale generale , materiale plastice, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, deplasare și deformare.
forță de încercare Max | 1000KN |
Testul de interval de măsurare a forței | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
Rezoluția forță de încercare | 0.01kN |
Rezoluția de măsurare Cilindree | 0.01mm |
Precizia de măsurare Deformarea | 0.01mm |
The maximum tensile test space | 600mm |
The maximum compression space | 550mm |
accident vascular cerebral cu piston | 200mm |
Clamping diameter of circular specimen jaw | F13-F40mm |
specimen de plat grosime falcă de prindere | 0-40mm |
Maximum clamp width of flat specimen | 75mm |
dimensiune Platen | 160*160mm |
The maximum distance between two points of bending test | 350mm |
Stretch space two pillar distance | 465mm |
Îndoirea Lățimea rolei | 140mm |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150mm |
Diametrul probei de forfecare | 10mm |
The maximum piston movement speed | 80mm / min |
Voltaj | 220V, Trei faze |
Puterea motorului pompei | 1.1kw |
Beam moving motor power up and down | 0.75kw |
mod de fixare | automat / manual tightening |
The mainframe dimensions | despre 800mm *580 mm*2100mm |
Măsurarea dimensiunilor dulapului | about 1120mm *700mm *950mm |