universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, utiliza carga hidráulica, computer display test results, operación fácil, accurate and reliable test readings, can do the general steel and other metal materials tensile, compresión, bending and shear test, can also be used as general materials , plástica, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, el desplazamiento y la deformación.
la fuerza de ensayo máx | 1000KN |
Prueba de rango de medición de fuerza | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
Resolución fuerza de ensayo | 0.01kN |
resolución de medición de desplazamiento | 0.01mm |
precisión de la medición de la deformación | 0.01mm |
The maximum tensile test space | 600mm |
The maximum compression space | 550mm |
Golpe del pistón | 200mm |
Clamping diameter of circular specimen jaw | F13-F40mm |
muestra plana espesor de sujeción de la mandíbula | 0-40mm |
Maximum clamp width of flat specimen | 75mm |
tamaño de platina | 160*160mm |
The maximum distance between two points of bending test | 350mm |
Stretch space two pillar distance | 465mm |
Doblado ancho del rollo | 140mm |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150mm |
Diámetro de la muestra de cizallamiento | 10mm |
The maximum piston movement speed | 80mm / min |
voltaje | 220V, Tres fases |
Potencia del motor de la bomba | 1.1kw |
Beam moving motor power up and down | 0.75kw |
modo de sujeción | automático / manual tightening |
The mainframe dimensions | aproximadamente 800 mm *580 mm*2100mm |
Medición de las dimensiones del gabinete | about 1120mm *700mm *950mm |