universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, 유압 로딩을 사용, 컴퓨터 디스플레이 테스트 결과, 쉬운 조작, 정확하고 신뢰할 수있는 테스트 판독 값, 일반 강철 및 기타 금속 재료 인장을 할 수 있습니다., 압축, 굽힘 및 전단 시험, 일반 재료로도 사용 가능 , 플라스틱, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, 변위 및 변형.
최대 시험 하중 | 1000KN |
시험 하중 측정 범위 | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
시험 하중 해상도 | 0.01KN |
변위 측정 분해능 | 0.01mm |
변형 측정 정확도 | 0.01mm |
The maximum tensile test space | 600mm |
The maximum compression space | 550mm |
피스톤 스트로크 | 200mm |
Clamping diameter of circular specimen jaw | F13-F40mm |
평판 시험편의 클램핑 턱 두께 | 0-40mm |
Maximum clamp width of flat specimen | 75mm |
플래 튼 크기 | 160*160mm |
The maximum distance between two points of bending test | 350mm |
Stretch space two pillar distance | 465mm |
롤의 폭을 굽힘 | 140mm |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150mm |
전단 시편 직경 | 10mm |
The maximum piston movement speed | 80mm / 분 |
전압 | 220V, 세 단계 |
펌프 모터 동력 | 1.1kw |
Beam moving motor power up and down | 0.75kw |
클램핑 모드 | 오토매틱 / manual tightening |
The mainframe dimensions | 약 800mm *580 mm*2100mm |
캐비닛 크기를 측정 | about 1120mm *700mm *950mm |