universal tensile testing machine 1000KN Hydraulic strength universal Testing Machines Price
1000KN Hydraulic strength universal Testing Machine adopts column structure, verwendet hydraulische Lade, Testergebnisse der Computeranzeige, einfache Operation, genaue und zuverlässige Testwerte, kann den allgemeinen Stahl und andere Metallwerkstoffe zugfest machen, Kompression, Biege- und Schertest, kann auch als allgemeines Material verwendet werden , Kunststoff, cement and concrete compression and bending tests.
1. The tester adopts the hydraulic cylinder under-mounted type, the power to adjust the test space and the transmission device are installed at the bottom of the testing machine, and the transmission is stable; the upper and lower jaw seats are fully open structure, and the automatic hydraulic clamping system is easy to install and has good stability. .
2. The lower beam is lifted and lowered by motor through reducer, chain transmission mechanism and screw auxiliary drive to realize the adjustment of stretching and compression space.
3, the machine all operations can be completed by computer control, easy to operate and ensure safety.
4, the machine has a load speed display function, can achieve the required loading speed of the sample, the operating part and the indicated part of the appropriate height, easy for the experimenter to operate and observe.
5. The tester adopts a computer-controlled all-digital wide-band electro-hydraulic digital valve to drive a precision hydraulic cylinder and carry out various modes of automatic control of test force, Verschiebung und Deformation.
Max Prüfkraft | 1000KN |
Prüfkraft Messbereich | 1%-100%FS (6-600KN) |
Relative error of test force indication | ±1% of indication value |
Prüfkraft Auflösung | 0.01kN |
Wegmessung Auflösung | 0.01Millimeter |
Deformationsmessgenauigkeit | 0.01Millimeter |
The maximum tensile test space | 600Millimeter |
The maximum compression space | 550Millimeter |
Kolbenhub | 200Millimeter |
Clamping diameter of circular specimen jaw | F13-F40mm |
Flachprobe Klemmbackendicke | 0-40Millimeter |
Maximum clamp width of flat specimen | 75Millimeter |
Platen Größe | 160*160Millimeter |
The maximum distance between two points of bending test | 350Millimeter |
Stretch space two pillar distance | 465Millimeter |
Biegewalzenbreite | 140Millimeter |
Bending roller diameter | Φ40mm |
The maximum bending degree | 150Millimeter |
Scherprobendurchmesser | 10Millimeter |
The maximum piston movement speed | 80mm / min |
Stromspannung | 220V, Drei Phasen |
Leistung des Pumpenmotors | 1.1kw |
Beam moving motor power up and down | 0.75kw |
Klemmbetrieb | automatisch / manual tightening |
The mainframe dimensions | über 800mm *580 mm*2100mm |
Messschrankabmessungen | about 1120mm *700mm *950mm |